Paxton 339-111 Universal Series Proximity Reader, IP67 Surface Mount, Supports Net2

The universal reader is suitable to use with most access control systems that accept a clock and data input, as well as PAC controllers that use a single signal wire. The reader is supplied with a choice of black or white fascias. Additional fascia colours are available if required. Installation – The reader is wired as shown in the installation instructions. The cable exits centrally from the back of the reader making drilling and mounting very accurate. Operation – A token is read by holding it within close proximity of the reader. Once a token has been read the card data is sent to the control unit and depending on the wiring configuration the red, green or amber LEDs can be used to indicate valid or invalid cards.

Features

Use with Paxton Access Net2 and other access control systems
Clock and data output
Low profile – less than 16mm deep
IPX7 rated – suitable for external use
Reads multiple technologies, Hitag2, EM4100 and PAC

Say Hi on

Whastapp

10am - 5pm

0333 3399 549

Account

Login Or Register

Paxton 339-111 Universal Series Proximity Reader, IP67 Surface Mount, Supports Net2